Robo Ganesh on skate board - using Arduino

This Year 2016 Ganesha Festival I've presented Robo Ganesha which is developed with Arduino.

Ajay Singh sir trained me to learn Arduino and Vivek helped me to build it.

Arduino Ganesha

I've used the following to develope this:

• Servo motor. - 6
• Arduino UNO -2
• Buzzer
• Bluetooth module
• Motor driver
• wheels
• Skateboard

 To develop this model joined three thermocole sheets together. and took the Print to carve the Ganesh idol. painted POP layer.

My motivating mother Smt. Shailaja Shekhar Devarakonda with me

My Robo Ganesh ready to move

here are some videos which shows its functions and what it does

Arduino Micro controller for Robotics Workshop

WORKING WITH ARDUINO BOARD

ME AT SWECHA

This weekend I've attended the Arduino Opensource Robotic workshop. It was really wonderful.

I met the people who already working on Arduino.
I also saw an obstacle avoiding Robot out of the Arduino.
Swecha is the Indian National Opensource programmers community organized the two days event.

First program with Arduino

Programming

The software can be found on arduino.cc .
It is free software, we can download.
And the hardware is an open hardware

I used the Arduino UNO, but you can use any type of Arduino

First Arduino Program ... Experimenting with LED (RGB combination... many more colors ... one after the Other ).


The program for the RGB sensor is : 

int redPin = 11;
int greenPin = 10;
int bluePin = 9; 
//uncomment this line if using a Common Anode LED
//#define COMMON_ANODE 
void setup(){  pinMode(redPin, OUTPUT);
 pinMode(greenPin, OUTPUT);
 pinMode(bluePin, OUTPUT);
  }
 void loop()
{  setColor(255, 0, 0);  // red 
 delay(1000);  setColor(0, 255, 0);  // green 
 delay(1000);  setColor(0, 0, 255);  // blue  
delay(1000);  setColor(255, 255, 0);  // yellow  
delay(1000);    setColor(80, 0, 80);  // purple  
delay(1000);  setColor(0, 255, 255);  // aqua  
delay(1000); 
//we can make many more colors by changing the numbers . we can make rainbow colors 
}
 void setColor(i
nt red, int green, int blue)
{  
#ifdef COMMON_ANODE    
red = 255 - red;    
green = 255 - green;    
blue = 255 - blue;  
#endif  analogWrite(redPin, red);  
analogWrite(greenPin, green);  
analogWrite(bluePin, blue);  
}

Working with RGB lights

Then I've written a program for the temperature sensor, (which senses the temperature of the area/room).

program for temperature sensor is :

int val;
int tempPin = 9;
void setup ()
{
Serial.begin(9600);
}

void loop ()
{
val = analogRead(tempPin);
float mv = ( val/1024.0)*5000; 
float cel = mv/10;
float farh = (cel*9)/5 + 32;

Serial.print("TEMPRATURE = ");
Serial.print(cel);
Serial.print("*C");
Serial.println();
delay(1000);

Serial.print("TEMPRATURE = ");
Serial.print(farh);
Serial.print("*F");
Serial.println();


}

I've also written a program for the LDR sensor, (which senses the amount of light present in the area/room).

program for LDR sensor is :

 int sensorPin = 9;
 int sensorValue = 0;
 
 void setup() 
 {
 Serial.begin(9600);
 }
 void loop() 
 {
 sensorValue = analogRead(sensorPin);
 Serial.println(sensorValue);
 delay(100);
 }